[castle96]

Hi, newbie here.
Done 500 miles (reg'd 6/2018 as demo). Manual. Just cant get on withthis A S&S. Don't like the idea, so I turn it off when I remember (can this be done PERMANANTLY??).
However sometimes I forget. Only on 5-6 times ina month has the A S&S kicked in when stationary (ie engine stopped):sad::sad: - takes me by suprize and I use the key to restart, panicking !. It should work/restart, when I dip the clutch - yes ? It doesn't.
Seems to be a fault then. First service in 6/19. So annoying

 

[castle96]

anyone please ???

 

[Nikolay Yordanov]

You can Not disable the system permanently. The engine starts when you take your foot from the breaks pedal.

 

[Aleksander]

There have been bypass models made for other cars with start/stop tech, but I haven't seen one specifically for the Eclipse Cross. Sometimes it can even be as simple as unplugging the factory module or a fuse.

 

[ribuck]

I would also like a way to disable it permanently.

What I do is to press firmly on the brake. When the auto-stop operates, if I want to have the engine ready to go, I ease off on the brake ever-so-slightly. The engine restarts, but the car remains braked until I take my foot off the brake fully.

 

[castle96]

mine operates (starts up) when you depress clutch - obviously manual. Nothing to do with brake. Surely this can be turned off Someone said "obd port" …??
Apparently if the demister is turned on, this will cut off stop start, but then the air con is also on. When you turn engine off I assume you would have to turn on demister again, so not a permanent fix...duh

 

[dopeyOne]

Hi castle96, ok, let me try to describe to you how this can be done the cheapest way. Cut a small little cardboard small enough to slip into the gap (just one side will do) anywhere around the S/S switch. This will result in making the switch at a permanently 'pressed in' position. i am currently using this method. One less procedure every time i start engine...lol.

 

[zarbs]

Boy am I glad we don't have this on my model in Oz. My partners Subaru XV/Crosstrek has it and I hate it. Luckily, there is a switch on the dash that you press to disable it for that drive but it can't be disabled permanently either.

Interestingly, I did see the ASG option pop up on my centre dash display the other day after I disconnected and reconnected the battery but I couldn't make any selection of the option. It seems to have disappeared now.

 

[mtgtnt]

I dont get the logic behind the software in our EC. No option to turn off the start/stop by default, nor any option to start ECO mode by default.

I wish I could get ahold of the software myself and start rewriting it. It is described as 'Open Source' but where is it available?

 

[dopeyOne]

Gotten this cable from TaoBao. Working superb. Plug and Play. Start Engine, 3 secs later, S/S will be Off. This becomes a default. If you wana turn it on, just press S/S button as per normal.

 

[pcapkovic]

Hi dopeyOne, pls. could you also provide link to the TaoBao shop where to buy this cable. TaoBao is Chinese site without any ability to change language and I am not able to find anything related to the deactivation of S/S. I will appreciate it, it is incredible not to be able to turn the functionality permanently off. Thks

 

[zarbs]

You could try some of the TaoBao agent sites (below) that are in English but their fees and postage seem a bit rich. Might assist in finding the item and then pasting it into TaoBao. As Alibaba owns TaoBao and AliExpress you may be able to find it on AliExpress as well. The Alibaba site may also have the item but it is catering for bulk purchasers wanting large quantities of an item. Minimum order is listed in the products description.

https://www.engtb.com/

https://tbfocus.com/

 

[pcapkovic]

Zarbs thank you for provided urls. But I am not sure what to look for, if it is "Mitsubishi S&g cable" or "Universal start stop cable" or something else. I am not able to find anything related to this. I thing that this cable should be specifically built only for Mitsubishi Eclipse Cross due to the connectors used. So the direct URL to this product (cable) on TaoBao of Aliexpress or other Chinese e-shop will help.

 

[zarbs]

Maybe try a personal message direct to @dopeyOne and hope he responds.

 

[zarbs]

Just browsing an EC threads on myforum.com and DopeyOne is a member there with 115 posts. So he is probably a Chineses speaker. This is a Singaporean site and their version of English can sometimes be unusual to decipher. I use to work in Singapore at times and they have their own quirks. Try to contact him through that forum as he seems to interact more there.

 

[zarbs]

Zarbs thank you for provided urls. But I am not sure what to look for, if it is "Mitsubishi S&g cable" or "Universal start stop cable" or something else. I am not able to find anything related to this. I thing that this cable should be specifically built only for Mitsubishi Eclipse Cross due to the connectors used. So the direct URL to this product (cable) on TaoBao of Aliexpress or other Chinese e-shop will help.

I have sent him a message on the other site on your behalf. Lets hope he responds...

 

[dopeyOne]

Hi Hi, sorry for the truancy...lol.
wat i did was, i copied the TB URL link and gotten a local purchase platform to help in purchasing overseas products.
Through this method, it's easier because all shipping and procedures are taken care of.


i have attached the direct link to this item in TB.https://item.taobao.com/item.htm?ut...ue&short_name=h.V0tiRio&sm=1e517c&app=firefox

i also tried copying this link into the English TB link which Zarbs provided earlier.


It would probably look like this:
https://www.engtb.com/item/603653346313.html

 

[zarbs]

Hi Hi, sorry for the truancy...lol.


It would probably look like this:
https://www.engtb.com/item/603653346313.html

Thanks @dopeyOne for the follow up. Hopefully this will assist him in getting the cable. The link seems to work so he can attempt a purchase and see how he fairs. Best regards.

Zarbs

 

[pcapkovic]

@zarbs and @dopeyOne, thank you very much for the information provided. Currently I am able to find this product on the shop (engtb.com) but not able to order it. During whole process I am facing the following error 支付失败 (this means Payment failed), but I don't know why. I am from Slovakia (Central Europe) and as a European Union (EU) member we have to follow EU's rules related to digital payments. So this could be a reason why I am not able to pay by Master Cards (I have tried two different cards gold and classic) on this shop through Chinese PacyPay payment gateway. May be 3D secure protection caused this. I really don't know. Boys have you any experiences with ordering form engtb.com out of China or other Asian countries? @dopeyOne how do you order it? Are you from China as @zarbs has written (or guessed)? I hope that this is not a way how to lose all my money from both accounts by using Chinese payment provider . Thanks

 

[mtgtnt]

I found the following today by pure luck:
https://www.imoney.my/articles/taobao-shopping-guide

This might help us in navigating the site for purchases.
And hi pcapkovic. Although im not slovak, I also live in Slovakia and own a 2018 EC and would love to get my hands on one of those cables too. Maybe two. One for reverse engineering. This should work on the ECO switch too.
How much are they listed for in Euro? How much is the shipping? Probably cheaper ordering more than one for shipping if the price of the cable is a fair amount.